Panasonic SD-253 Service Manual page 18

SD-253
3.13. lnner lid
1. Remove the three screws that secure the inner lid.
2. Insert a thin flat-blade driver into the space between the top
lid and the inner lid (six locations) to move it up and take out
the inner lid.
3.14. Steam vent and Lid lever
1. Remove the screw and take out the lid lever, spring B, and
washer A.
2. Remove the four screws and take out the steam vent and
lid cover.
3. Take out magnet plate A and the magnet.
Caution:
Confirm that washer A has the correct side up before
fastening the screws. If the wrong site of the washer is
facing up, the lid lever won't move.
No.
1 Screw
2 Top lid
3 Inner lid
4 Screw driver
5 Tab
Caution:
Remove tabs (1), (2), (3), (4), (5), and (6) in this order.
No.
1 Top lid Ass'y
2 Screw
3 Lid cover
4 Lid lever
5 Spring B
6 Steam vent
7 Washer A
18
Fig.20
Parts Name
Fig.21
Parts Name