Conducted Noise; Voltage Tolerance; Figure 3. Typical 5V/12V Startup And Operation Current Profile For 250Gb Models - Seagate CONSTELLATION.2 ST91000640NS Product Manual

Figure 3. Typical 5V/12V startup and operation current profile for 250GB models

3.8.2

Conducted noise

Noise is specified as a periodic and random distribution of frequencies covering a band from DC to 10 MHz.
Maximum allowed noise values given below are peak-to-peak measurements and apply at the drive power
connector.
• +5v
• +12v
Note. Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write
current.
3.8.3

Voltage tolerance

Voltage tolerance (including noise):
5V +10 / -7.5%
12V +10 / -7.5%
14
= 250 mV pp from 100 Hz to 20 MHz.
= 450 mV pp from 8 kHz to 20 kHz.
= 250 mV pp from 20 kHz to 5 MHz.
Constellation.2 Serial ATA Product Manual, Rev. B