Interface Requirements; Fc-Al Features; Fibre Channel Link Service Frames - Seagate CHEETAH NS 10K.2 FC ST3600002FC Product Manual

9.0

Interface requirements

This section partially describes the interface requirements as implemented on Cheetah NS 10K.2 FC drives.
Additional information is provided in the Fibre Channel Interface Manual (part number 100293070).
9.1

FC-AL features

This section lists the Fibre Channel-specific features supported by Cheetah NS 10K.2 FC drives.
9.1.1

Fibre Channel link service frames

Table 6 lists the link services supported by Cheetah NS 10K.2 FC drives.
Table 6: Link services supported
Type of frame
Basic link service frames
Basic link service reply frames
Extended link service frames
Extended link service reply frames
Fibre Channel Services
Cheetah NS 10K.2 FC Product Manual, Rev. B
Link service
Abort Sequence (ABTS)
Basic_Accept (BA_ACC)
Basic_Reject (BA_RJT)
N_Port Login (PLOGI)
Fabric Login (FLOGI)
Logout (LOGO)
Process Login (PRLI)
Process Logout (PRLO)
Read Link Status (RLS)
Fabric Address Notification (FAN)
Port Discovery (PDISC)
Address Discovery (ADISC)
Third-party Process Logout (TRPLO)
Accept (ACC)
Link Service Reject (LS_RJT)
Register FC-4 Types (RFT_ID)
47