Silvercrest HealthForYou SFT76 Instructions For Use Manual page 32

guidelines and manufacturer's declaration - electromagnetic interference
The SFT 76 is intended for use in the ELECTROMAGNETIC ENVIRONMENT described
below. The customer or the user of the SFT 76 should ensure that it is used in this type of
environment.
electromag-
netic
interference
measurements
RF emissions
in accordance
with CISPR 11
RF emissions
in accordance
with CISPR 11
Harmonic emis-
sions in accord-
ance with IEC
61000-3-2
Emissions arising
from voltage
fluctuations /
flicker emissions
in accordance
with IEC
61000-3-3
conformity electroMagnetic enVironMent -
guideline
Group 1 The SFT 76 uses RF energy exclusively for its
internal FUNCTION. Therefore, an RF emission
is very low and it is improbable that neigh-
bouring electronic devices will be affected by
interference.
Class B The SFT 76 is intended for use in all indoor
areas, including living areas, and is suitable
for those which are directly connected to a
PUBLIC SUPPLY NETWORK which also sup-
plies buildings used for residential purposes.
Not applicable
Not applicable
GB/IE/NI 33