Table of Contents
Advertisement
5. System Reference
Specifications
Table 5.1. Specifications
Item
Ethernet standards
Data communication rate
Access method
Communication method
Topology
Flow control
Number of effective ports
Switching method
Address table
Buffer capacity
Aging time
LED indicator
Power supply voltage
FG terminal
Power consumption (Max.)
Physical dimensions (mm)
Weight
Installation method
Table 5.2. Installation environment requirements
Item
Operating ambient temperature
Storage ambient temperature
Ambient humidity
Floating dust particles
Corrosive gases
Line-noise
Noise
Electrostatic
immunity
discharge immunity
Vibration
Sweep resistance
resistance
Shock resistance
Grounding
Installation location
IEEE802.3/IEEE802.3u -compliant
10/100Mbps (auto-recognition)
CSMA/CD
All ports: Full/Half duplex (auto-recognition)
Star topology
Full Duplex : IEEE802.3x compliant flow control
Half Duplex :Back pressure
8
Store and forward
1,024 entries
512Kbyte
200 to 300s
POWER (green) , Link/ACT 10M (orange) , Link/ACT 100M (green)
12V - 24VDC±5%
The power connector is equipped with FG terminal.
0.22A at 12VDC, 0.15A at 24VDC
52.4 (W) x 64.7 (D) x 94.0 (H) (exclusive of protrusions)
160g
Mounts onto a 35mm DIN rail with one motion. The unit is equipped with a
mounting mechanism as standard.
0 to 50°C
-10 to 60°C
10 to 90%RH (No condensation)
Tolerant of small amounts (non excessive)
None
AC line/2kV, Signal line/1kV (JIS C61000-4-4 Level 3, IEC61000-4-4 Level 3)
Contact discharge/4kV (JIS C61000-4-2 Level 2, IEC61000-4-2 Level 2)
Air discharge/8kV (JIS C61000-4-2 Level 3, IEC61000-4-2 Level 3)
10 to 57Hz/half amplitude 0.15mm,57 to 150Hz/2.0G
40minutes each in X, Y, and Z directions
(JIS C60068-2-6-compliant, IEC60068-2-6-compliant)
15G, sine half-wave pulse for 11ms each in X, Y, and Z directions
(JIS C60068-2-27-compliant, IEC60068-2-27-compliant)
Ground the FG terminal to the protective ground conductor.
Inside a control panel
Specifications
Specifications
5. System Reference
16
Advertisement
Table of Contents
