Table of Contents
Advertisement
4. Connecting to a Network
Network Cables
Cables meeting the following specifications should be used:
-
10BASE-T: Category 3 or higher UTP, STP cable
-
100BASE-TX : Category 5 or higher UPT, STP cable
-
There are two types for UTP and STP cables: a straight-through cable and a crossover cable. The
Auto MDI/MDI-X feature allows connections using either type of a cable.
Connecting to Programmable Controllers,
Personal Computers, Additional HUB Units, or
Bridges
When connecting a programmable controller, personal computer, additional HUB unit, bridge, or other
device, connect it to any 10BASE-T/100BASE-TX port of the switching HUB unit using either a
straight-through or crossover cable.
Figure 4.1. Connection example
4. Connecting to a Network
14
Advertisement
Table of Contents
