Table of Contents
Advertisement
Table 2.3. 10BASE-T/100BASE-TX
Name
10BASE-T/
Ports 1 to 8
100BASE-TX port
Use these ports to connect personal computers, additional HUB units, bridges, or other
devices.
Communication rate (10/100Mbps) and communication method (half/full duplex) can
be automatically recognized.
Using the Auto MDI/MDI-X function, the cable type (straight-through or crossover
cable) can be automatically recognized.
Power Supply
Use a power supply capable of establishing 11.6VDC or higher within 50ms. Power supplies that can not
meet this requirement may cause device failures or accidents.
Input voltage (V)
25.2
24
12
11.6
Figure 2.2. Time required to establish certain voltage
The AC/DC power supply connected to the unit must be a CE-marked product.
Ground the FG terminal to a protective ground conductor.
Recommended power supply: PS5R-SF24 (made by IDEC Corporation)
Pin name
1
2
3
4
5
6
7
8
50
Time (ms)
Function
Signal
TX+
Transmit (+)
TX-
Transmit (-)
RX+
Receive (+)
-
-
-
-
RX-
Receive (-)
-
-
-
-
2. Part Names and Settings
Description
10
Advertisement
Table of Contents
