3. Setup of Hardware
3. Setup of Hardware
Mounting/Removing a Unit on/from a DIN Rail
Mounting Procedure
(1) Lifting the fixing hook of a unit with a flathead screwdriver renders it into a lock-enabled condition.
Figure 3.1. Mounting a unit on a DIN rail < 1 / 3 >
(2) Hook the unit from the upper part of a DIN rail, and push the lower part of the unit to the DIN rail.
Figure 3.1. Mounting a unit on a DIN rail < 2 / 3 >
(3) The fixing hook automatically locks so that the unit can be mounted with one simple motion.
Figure 3.1. Mounting a unit on a DIN rail < 3 / 3 >
11