H3C S9500E Series Configuration Manual page 421

To do...
Enter routing policy view
Step 2
Match
information specified
in the ACL
Define Match
Step 3
match information specified
criteria in the IP prefix list
for IPv4
Match
routes
information
next hop or source is
specified in the ACL
or IP prefix list
Match IPv6 routing information
Step 4
whose next hop or source is
specified in the ACL or IP prefix
list
Match BGP routing information
Step 5
whose AS path attribute is
specified in the AS path lists
Match BGP routing information
Step 6
whose community attribute is
specified in the community lists
Match routes having the specified
Step 7
cost
Match BGP routing information
Step 8
whose extended community
attribute is specified in the
extended community lists
Match routing information having
Step 9
specified outbound interfaces
Match routing information having
Step 10
MPLS labels
Use the command...
route-policy
deny | permit } node node-
number
IPv4 routing
if-match acl acl-number
IPv4 routing
if-match ip-prefix ip-prefix-name
IPv4 routing
if-match ip { next-hop | route-
whose
source } { acl acl-number | ip-
prefix ip-prefix-name }
if-match ipv6 { address | next-
hop | route-source } { acl acl-
number | prefix-list ipv6-prefix-
name }
if-match
number&<1-16>
if-match
community-list-number
match ] | adv-community-list-number
}&<1-16>
if-match cost value
if-match
comm-list-number&<1-16>
if-match interface { interface-type
interface-number }&<1-16>
if-match mpls-label
421
route-policy-name {
as-path AS-PATH-
community
{ basic-
[ whole-
extcommunity ext-
Remarks
Required
Optional
Not configured by
default
Optional
Not configured by
default
Optional
Not configured by
default
Optional
Not configured by
default
Optional
Not configured by
default
Optional
Not configured by
default
Optional
Not configured by
default
Optional
Not configured by
default
Optional
Not configured by
default