Table of Contents
Advertisement
1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
1-1: BACK CABINET (Refer to Fig. 1-1)
Remove the 6 screws 1.
1.
Remove the 2 screws 2 which are used for holding the
2.
Back Cabinet.
3.
Remove the Back Cabinet in the direction of arrow.
1
1
1
1
2
2
1
1-2: CRT PCB (Refer to Fig. 1-2)
CAUTION: BEFORE REMOVING THE ANODE CAP,
DISCHARGE ELECTRICITY BECAUSE IT
CONTAINS HIGH VOLTAGE.
BEFORE ATTEMPTING TO REMOVE OR
REPAIR ANY PCB, UNPLUG THE POWER
CORD FROM THE AC SOURCE.
1.
Remove the Anode Cap.
(Refer to REMOVAL OF ANODE CAP)
2.
Disconnect the following connector:
(CP801).
3.
Remove the CRT PCB in the direction of arrow.
Front Cabinet
All manuals and user guides at all-guides.com
DISASSEMBLY INSTRUCTIONS
Front Cabinet
1
Back Cabinet
Fig. 1-1
CP801
CRT PCB
Fig. 1-2
B1-1
1-3: AV PCB/DVD BLOCK (Refer to Fig. 1-3)
Unlock the support 1.
1.
2.
Remove the Plate Bottom Holder.
Remove the screw 2.
3.
4.
Disconnect the following connectors:
(CP303, CP404 and CP3800).
5.
Remove the AV PCB/DVD Block in the direction of arrow.
Front Cabinet
Plate Bottom Holder
1
1-4: DVD BLOCK (Refer to Fig. 1-4)
1.
Disconnect the following connectors:
(CP8001 and CP8002).
Remove the 4 screws 1.
2.
3.
Remove the DVD Block in the direction of arrow.
1
1
1
CP8002
CP8001
AV PCB
2
CP404
CP3800
CP303
AV PCB/DVD Block
Fig. 1-3
1
DVD Block
Fig. 1-4
Advertisement
Table of Contents
