Nasuni Edge Initial Configuration Manual page 34

Configuring the Nasuni Edge Appliance
• (Optional) You can specify a gateway for each traffic group. This gateway is used to return
traffic for clients outside one of the Nasuni Edge Appliance's local networks that do not use
the default gateway. In the Gateway text box, enter the IP address for the gateway.
• Click OK to use these values. Click Cancel to exit this page without making any changes.
5. In the System Settings area, from the Settings Source drop-down list, select one of the
following:
• DHCP (Dynamic Host Configuration Protocol): Provides a network IP address for a host on
an IP network automatically. The Default Gateway, Search Domain, Primary DNS Server,
and Secondary DNS Server fields become unavailable.
• DHCP with custom DNS: Provides a network IP address for a host on an IP network
automatically. The Default Gateway field becomes unavailable. Enter the following
information:
• Enter one or more local search domains in the Search Domain text box, each separated
by a space. You must enter valid hostnames.
You can use search domains to avoid typing the complete address of domains that you
use frequently. The search domains that you enter are automatically appended to names
that you specify for purposes such as Active Directory configuration, data migration
sources, HTTPS proxy, and NTP server. For example, if you specify the search domain
"mycompany.com", then typing "server1" for one of these purposes would connect to
"server1.mycompany.com".
• Enter the IP address for your primary DNS server in the Primary DNS server text box.
You must enter a valid hostname or IP address.
Nasuni Edge Appliance Initial Configuration Guide 8.3
Figure 1-14: System Settings page.
Network Settings
34