Connecting With The Nasuni Edge Appliance - Nasuni Edge Initial Configuration Manual

Configuring the Nasuni Edge Appliance

Connecting with the Nasuni Edge Appliance

Connecting with the Nasuni Edge Appliance
You should have an initial IP address from the installation of your Nasuni Edge Appliance on either a
hardware appliance or a virtual machine. This IP address should be provided by the IT specialist who
initially set up the Nasuni Edge Appliance.
Open a Web browser and enter the IP address using this command:
https://<IP address>:8443
where <IP address> is the IP address.
When you attempt to access the Nasuni Edge Appliance Home page for the first time, a message might
appear indicating that the security certificate is not trusted. You can still access the site to proceed with
the initial configuration procedure.
Continue with the next section, "SSL Security Certificate" on page 22.
Nasuni Edge Appliance Initial Configuration Guide 8.3 21