Table of Contents
Advertisement
7-33 Process PI Proportional Gain
Range:
[0.00 - 10.00]
7-34 Process PI Integral Time
Range:
[0.10 - 9999.00 s]
7-38 Process Feed Forward Factor
Range:
[0 - 400%]
4.5 Main Menu
The Main Menu gives access to all parameters.
1.
To enter the Main Menu, press [MENU] key until indicator in display
is placed above Main Menu.
▲
▼
2.
Use [
] [
] to browse through the parameter groups.
3.
Press [OK] to select a parameter group.
▲
▼
4.
Use [
] [
] to browse through the parameters in the specific group.
5.
Press [OK] to select the parameter.
▲
▼
6.
Use [
] [
] to set/change the parameter value.
7.
Press [OK] to accept the value.
8.
To exit, press either [Back] twice to enter Quick Menu, or press
[Menu] once to enter Status.
Function:
Enter the P-factor.
Function:
Enter the I-factor.
Function:
Only applicable with changing set-points.
Illustration 4.9: Indicating Main Menu mode
DET-579A
AF-60 LP™ Micro Drive Operating Instructions
4
25
Advertisement
Table of Contents
