Advertisement
For "User", "Template" and "Series" the following actions are available:
a) Filter or find, search for a previous entry
b) Edit
c) Add
, add a new entry
d) Delete
e) Select by tapping an entry
All entries and measurements are automatically stored.
Please refer to the GRX user manual for further details and additional information.
Log: Examine the data log to view your inspections. To export or delete data series, swipe the
screen from right to left on the relevant series and these icons appear:
o
Export data: export the logged data to a USB stick for further data processing,
analysis and reporting on a computer.
o
Delete data. Note, all measurements within the data series will be deleted.
Important guidelines
Position the GRX instrument in close contact with the elements to be inspected to get the best
data quality. Use the red 'measurement field center indicators' on the side and bottom of the GRX
to check you are positioning the GRX correctly.
Keep the GRX lenses free of smear and dust.
If errors are detected during a measurement or calibration sequence, a message will be displayed
on the screen. Please refer to the GRX user manual for further details.
DELTA recommends re-calibrating or changing the calibration target bi-annually. If damaged or
dirty beyond cleaning the calibration target has to be changed immediate to ensure correct
measurement results.
Safety precautions
In case of any severe error condition remove the battery immediately.
GRX Quick Guide V1.0
, edit an entry
, delete an entry
Advertisement
