Before First Use; Use And Operation; Cleaning And Care - Klarstein 10028097 Manual

Place the Ice Maker securely onto a sturdy and even surface away from heating source and avoid
direct sunlight, so as not to impact the ice-making performance. Ice maker should work in a place
with well ventilations. Ensure that a minimum space of 20cm from Ice maker's air outlet and inlet
is not obstructed. Ambient temperature for Ice maker could not be less than 5°C. Ice maker should
not be used outdoor.
• Break down all the package components.
• Make an inventory accessories and instructions.
• Place the ice maker in a suitable position.
• It is better to clean the machine before use.
• Switch on the power source. Do not turn on the Ice maker within 30 minutes after moving the
• ice maker.
• Pour water into the water tank. Please use drinking water for making ice.
• Press key to start making ice.
Real Time Setting
Press the SET button one time,
button one time, minutes flash, press the
ON/OFF Timer
• Press the SET button 3 times,
button one time,
• Press the SET button 5 times,
button one time,
The timer functions take on use
Press to set timer, set the cycle timer function mode: time power on > time power off > timer off.
Power on default time is 8:00, power off default time is 12:00.
Self-Clean Mode
The self-clean mode should be put into operation before you use your ice maker for the first time
and/or if there has been a long period without use.
Three Icons as Large, Medium and small Icons will be on at the same time when the ice maker is
in self-clean mode.
Stage 1
• Add equal parts of water and vinegar (1:1) to the ice maker's reservoir.
• With the stand-by mode, keep pressing ON/OFF button at least 5 seconds to activate the self-clean
mode. Please note that self-clean mode will start automatically after "Beep" sound.
• During the self clean mode, the upper water bucket is filled and dumped. The pump will remain in
continuous operation as it feeds water to the bucket and evaporator coils. This cycle will continuous
for five times.
• Upon completion, the unit automatically changes to stand-by mode.
9

Before first Use

Use and Operation

hour blinking, press the
hour blinking, press the
minutes flash, press the
hour blinking, press the
minutes flash, press the

Cleaning and Care

button to set hour, press the SET
button to set minutes.
button to set hour, press the SET
button to set minutes;
button to set hour, press the SET
button to set minutes;