ICHRoboter iCleaner-200D User Manual page 9

4.3 Proper Shut Down and Care
4
(2) Clean iCleaner-200D: Invert the iCleaner-200D gently onto the floor, unlock
the Latch on the Base Plate (Pic4.3.2) and remove the Filter Bag from Base
Plate, clean the Filter Bag (Pic.4.3.3), once clean place the Filter Bag on its
frame, reassemble the Base Plate and put it back into the iCleaner-200D once
the Filter Bag is dry.
(Note: When re-fitting the Filter Bag to the Base Plate, please ensure the long
sides of the Filter Bag are smooth to ensure an easy fit into the base of the
iCleaner-200D.)
6
OPEN
OPEN
(1) To Shut Down The iCleaner-200D:
Turn the power switch on the power Box
to the off position, once the iCleaner-
200D finishes working, pull the Floating
Cable slowly until the Handle emerges
from the water (Pic.4.3.1), and then pull
the iCleaner-200D out of the pool by its
Handle.