Walker's Silencer BT User Manual

SILENCER BT

USER MANUAL

Included
• Left and right Silencer BT electronic earbuds
• Small / medium / large (left/right) Sure-Lock™ sizing fins (6 total)
• Small / medium / large (one set for each ear) foam eartips (6 total)
• Cleaning Brush
• Charging Case with Detachable Lanyard
• Micro USB cable
• FREE WALKERS APP available on iTunes & Google Play
Charging the Earbuds
The earbuds automatically recharge while resting in their respective bays
in the charging case. The earbuds magnetically snap into the bays to
create a reliable connection. The status light on the earbuds will turn red
when the earbuds begin charging and turn blue when charging is
complete. Battery Life 14 Hours / 4 Hours Bluetooth Streaming
Charging the Charging Case
(estimated 6 total earbud charges)
Using a USB Micro-B cable, connect the charging case to a USB power
adapter. With most adapters, the case should be fully charged within 2 ½
hours.
Fitting the earbuds
While fitting the earbuds, ensure that they are powered off. Slide the Sure-
Lock™ sizing fins over the housing, and install the foam tips to the ear
canal post on the device. If you are unsure of which size fins and foam tips
to use, begin with the medium size.
When ready to insert into ear, roll and compress the foam tip between
your fingers. Insert into your ear and hold in place for 10-15 seconds to
allow the foam to expand and seal within your ear.
A properly sealed Silencer BT earbud will significantly reduce outside
noise, muffling the ambient sound. When fitting, be sure the earbuds are
powered off when testing how well the foam tips seat your ears.
Try different combinations of the included sizing fins and foam tips to
obtain a good seal and secure fit. If the foam tip or sizing fin causes pain
while worn, try a smaller size that still created a good seal with your ear.