Download Print this page

Walker's Power Muffs Owner's Manual

Advertisement

Quick Links

OWNER'S MANUAL
POWER MUFFS
Increases Hearing
• Up to nine times with 50 dB of power for the highest rating
in the industry.
Protects Hearing
• Sound Activated Compression (SAC) circuit helps protect
hearing from harmful loud sounds, by reducing the
amplification of those sounds to a safe level. Noise Reduction
Rating (NRR) of 24 dB is among the highest in the industry.
Adjustable Frequency Tuning (AFT)
• Two independent AFT controls allow the user to focus on
specific sound frequencies for crystal-clear reception in any
situation. The AFT control allows the user to fine tune the
bass/treble balance.
Volume Controls & Directional Sound
• Two independent volume controls allow for total adjustment of
the four wind resistant high frequency microphones.
Adjusting the AFT
The adjustable Frequency Tuning (AFT) knob is located directly behind the volume
control. The AFT dial operates independently from the volume control and enables
the user to adjust the sound frequencies to his/her individual levels.
Identifying Muff Components
Battery Compartment
Located beneath foam
(Size AAA)
1. Place the Walker's Power
Muffs™ on your head, with red
volume control on right ear and
the blue volume control on left
ear, adjust the padded
headband to create a
comfortable fit.
2. Turn on the power to your
Power Muffs™ and adjust the
volume to a comfortable level.
3. To increase the higher
frequency sounds in your right
ear, rotate the AFT control
forward (toward your nose).
4. To increase the higher
frequency sounds in your left
ear, rotate the AFT control
backward (toward the back of
your head).
That's it! A custom adjustment
any time, every time. No matter
where you are or how you are
using your Power Muffs™, with
the improved AFT control,
you're sure to have the custom
sound that meets your needs.
www.ActiveForever.com
Special Butyl Rubber Ear Pads
Stays soft and pliable
Maintains the perfect acoustic seal

Adjusting the Headband

Power Muffs come with independent headband and ear muffs adjustments. Size
the Power Muffs to comfortably fit your head by sliding the ear cups in or out of
the headband. The ear cups should fit comfortably, completely surrounding your
ear to get the perfect acoustic seal.

Replacing The Battery

The battery compartments are located under the padding on the inside of each ear
cup. The padding is cut for easy access. Remove the battery from compartment and
replace with two new Size AAA Alkaline batteries. Note the direction of the positive
(+) and negative (-) polls.
Toll-free customer support 877-269-8490
Adjustable, Padded Headband
Most Comfortable Fit
Additional hinge point allows
muffs to move as the head moves
Independent Volume Controls
Allow for true stereo sound
*Red on right ear, Blue on left.
Adjustable Frequency Tuning
Tune-in specific sound frequencies
Wind-Resistant,
High-Frequency Microphone
Makes it easy to identify sounds
and direction
Concave Cheek Relief
Won't interfere when shouldering a gun
Peel back upper foam piece
Battery Compartment
Size AAA Alkaline Battery
Padded foam liner

Advertisement

loading

Summary of Contents for Walker's Power Muffs

  • Page 1: Adjusting The Headband

    The AFT dial operates independently from the volume control and enables the Power Muffs to comfortably fit your head by sliding the ear cups in or out of the user to adjust the sound frequencies to his/her individual levels.
  • Page 2: Warranty Registration

    Motor-boating Sound Low battery Replace battery 3. Be careful not to drop your Power Muffs™ as this may damage its components. If Your Power Muffs™ Whistle 4. Never insert any foreign objects into your Power Muffs™. This could result in serious damage to the instrument.