Network Configuration
Enter a VLAN ID for vSphere vMotion.
Table
(Enter a 0 in the VLAN ID field for untagged traffic)
✓ Row 34
Network Configuration
Enter a VLAN ID for vSAN.
Table
(Enter a 0 in the VLAN ID field for untagged traffic)
✓ Row 38
Network Configuration
Enter a Name and VLAN ID pair for each VM guest network you want to create.
Table
You must create at least one VM Network.
✓ Rows 39-40
(Enter a 0 in the VLAN ID field for untagged traffic)
NOTE:
If you plan to have multiple independent VxRail clusters, we recommend using different VLAN IDs for vSAN traffic
and management traffic across multiple VxRail clusters to reduce network traffic congestion.
For stretched cluster, the VxRail nodes can optionally connect to the witness over a separate Witness Traffic Separation network.
For this network, , a VLAN is required for this Witness Traffic Separation network. The Witness Network Separation traffic must
be able be able to pass through upstream to the witness site. This is not a requirement for the other VxRail logical networks.
Network Configuration
Table
Enter the Witness Traffic Separation VLAN ID.
✓ Row 50
Network Planning Guide
16 |
© 2018 Dell Inc. or its subsidiaries