Table of Contents
Advertisement
1.Introduction to Cactus Technologies
Grade -245S Series mSATA SSD Products
Features:
Solid state design with no moving parts
·
Capacities from 4GB to 128GB
·
Compliant with Serial ATA 3.1 specifications
·
ATA-8 ACS2 compatible
·
Supports Serial ATA Generation I/II transfer rate of 1.5/3.0/6.0 Gbps
·
Supports ATA SMART Feature Set
·
Supports ATA Security Feature Set
·
Supports Data Set Management (TRIM)
·
Supports NCQ w/ max. queue depth of 32
·
Supports DevSLP
·
True Psuedo-SLC Mode
·
ECC capable of correcting up to 66 bit errors per 1KB
·
Enhanced error correction, < 1 error in 10
·
Voltage support: 3.3V±5%
·
Cactus Technologies
®
that complies with the Serial ATA 3.1 standard and is functionally compatible with a SATA
hard disk drive. Cactus Technologies
storage capacity.
Cactus Technologies
®
from well known vendors, such as Toshiba Corporation, operating in true Psuedo-SLC mode
(i.e. not Fast-page mode), with enhanced endurance and performance over standard MLC
NAND. In addition, it includes an on-drive intelligent controller that manages interface
protocols, data storage and retrieval as well as ECC, defect handling and diagnostics, power
management, and clock control. The controller's firmware is upgradeable, thus allowing
feature enhancements and firmware updates while keeping the BOM stable.
Cactus Technologies Limited
Cactus Technologies, Limited
OEM mSATA SSD is a high capacity solid-state flash memory product
®
OEM mSATA SSD provides up to 128GB of formatted
OEM mSATA SSD product uses high quality MLC NAND flash memory
OEM Grade -245S Series mSATA SSD Product Manual
14
bits read
®
OEM
v1.2
5
Advertisement
Table of Contents
