Product Description The Smart Door/Window Sensor can be installed on a door, window and any other open/close object. Working with Smart Zigbee Hub and Aztech Kyla App, it provides your home a security defense and creates scene with other devices. Base...
LED States LED Slowly Blinks Once per Second Device is searching for network LED Blinks Once Detection and alarm LED Blinks Once per 3 Seconds Low battery, replace batteries as soon as possible Note: The battery standby time is about 8-12 months...
Page 5
Operation Guide Step 1: Download Aztech Kyla App from Google Play/App Store Aztech Kyla App www.aztech.com Step 2: Login to Aztech Kyla App, then add “Smart Door/Window Sensor” to device list to enable the device.
Page 6
Step 3: Open the transmitter base cover and insert the battery. The device will start up immediately. Button Battery...
Page 7
Step 4: Install the transmitter on a door frame, the magnet on the door or window. The magnet should be installed closer to the right side of the transmitter. Use double-sided tape to paste transmitter and magnet on the installation location. Magnet Transmitter...
Restore Default Setting Press and hold the Reset button until the green light goes off, which means the sensor is disconnected from the Hub. Press the button again (until green LED light slowly flashes), meaning the the sensor is ready to reconnect with the Hub.
Technical Speci cations Power Supply CR2032 Battery x 1 Material of Housing PC and ABS Wireless Standard IEEE 802.15.4 Networking Mode Zigbee HA Operating Temperature -10 ~ 50°C Working Humidity 10% - 90% RH Transmitter Dimensions 61.5 x 30.3 x 11.7mm Magnet Dimensions 44.8 x 10.9 x 7.9mm...
Need help?
Do you have a question about the Kyla and is the answer not in the manual?
Questions and answers