Aztech KylaS WiFi Plug UK Easy Start Manual

Thank you for using Aztech KylaS product! Please keep this Easy Start Guide for
future use. For support or help, visit kylas.aztech.com

DISCLAIMER

Aztech Technologies Pte Ltd, its holding company and its associated companies
(hereinafter referred to collectively as "Aztech") does not guarantee that
adequate warning or protection will be given, and disclaims all warranties and
representations, whether expressed, implied or otherwise statutory, concerning
the product, including without limitation any warranty of merchantability or
fitness for a particular purpose. Aztech shall not be liable in any event for any
consequential, indirect, incidental, special, exemplary, punitive or enhanced
damages resulting from the use, maintenance or operation of the product.
Aztech makes no warranty or representation that the product constitutes a
fire alarm system or is compliant with any requirements prescribed by any
applicable state or laws, codes, regulations and/or other specifications that
may be set out by relevant authorities having jurisdiction (collectively referred
to as "regulations"). You shall be solely responsible for compliance with all
regulations.
To the maximum extent permitted by applicable law, you agree to hold
harmless and indemnify, including legal fees, Aztech and Aztech's personnel
against any third party claims or fines by authorities that arise or are alleged
to have arisen as a result of negligent or intentional act or omission by you
or breach by you of any the terms herein or any violation of any regulations.
1

PACKAGE CONTENTS

• WiFi Plug
• Easy Start Guide
• Warranty Card

PRODUCT DESCRIPTION

The KylaS WiFi Plug can be used to switch any device on or off when plugged
in. Through the KylaS app, you can control the device anytime and anywhere.
LED Indicator
On/Off Button,
Pairing Button
2

PRODUCT FEATURES

Remote Control: Turn the WiFi Plug on or off via the app while connected to
WiFi
Timer: Set a timer to turn the WiFi Plug on or off via the app
Countdown: Set a countdown to turn the WiFi Plug on or off via the app

IMPORTANT SAFETY INFORMATION

• Maximum power for KWFP-210-WF (UK) should be no more than
2990W, and maximum circuit should be no more than 13A. Otherwise,
overheating may cause fire.
• Maximum power for KWFP-220-WF (US) should be no more than
1100W, and maximum circuit should be no more than 10A. Otherwise,
overheating may cause fire.
• Not for humid or wet places such as bathroom and green house.

OPERATION GUIDE

1. Download the Aztech KylaS App from Google Play/App Store.
Requirement:
- iOS 11 or later
- Android 4.4 or later
3
2. Power on the device by switching on the power supply.
The device will be in Pairing Mode with blinking red LED. If it does not,
check the power source, or press and hold the Pairing button for more
than 5 seconds until the LED blinks in red.
3. Login to the Aztech KylaS, and add "WiFi Plug" to the device list by
following the setup guide on the app.
4. When paired successfully, the LED stops blinking.

PUTTING THE DEVICE IN PAIRING MODE

Put the device in Pairing Mode via one of the following methods:
• Power on the device for the first time.
• Press and hold the Pairing button for more than 5 seconds.
After 90 seconds idle, the device exits pairing mode and returns to the
previous mode.

POWERING ON AND OFF THE DEVICE

1. To power on, press the Pairing button on the device once, the green
LED lights up.
To power off, press the Pairing button on the device again, the green
2.
LED turns off.
4