Procon Grumbach MP GTFS Operating Manual page 18

3. Cooling period setting
Confirm two times with
the (menu) key.
(+) cooling/day
(-) cooling/time
Set the desired number of cooling periods per day and the length of the cooling periods
with the (+) or (-) key. Range of values: 0 to 24 cooling periods per day, 0 to 90 minutes.
After the setting has been carried out the new values are immediately saved.
4. Setting of the number of turning periods per day and
the turning period length
Confirm three times with
the (menu) key.
(+) turns/day
(-) turn/time
Set the desired number of turning periods per day and the length of the turning periods
with the (+) or (-) key. Range of values: 0 to 24 turning periods per day, 0 to 30 minutes.
After the setting has been carried out the new values are immediately saved.
t: 37.7° set: 37.7°
h: 60% set: 60%
Confirm with the (-) key.
ventila. adjust
per day: 12
t: 37.7° set: 37.7°
h: 60% set: 60%
Select by actuating the (+) or (-) key.
turns adjustment
per day: 12
– 18 –
ventila. adjust
time (min): 60
turns adjustment
time (min): 30