Setting The Option Code; Displaying Error Memory - Bosch 800 series Service Manual

58300000202443_ARA_EN_C
Table 9 Service mode menu options for 800 series wall ovens
7.2.2

Setting the Option Code

Option codes are programmed into the control module and are used
to define cavity type and oven configuration. In the event it becomes
necessary to manually program an option code in Service mode, the
table below can be used as a reference.
Copyright by BSH Home Appliances Corporation
This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.
JANUARY 2018
Model(s)
HBL8442UC
HBL8451UC
HBL8461UC
HBL8742UC
HBL8752UCC
HBL87M52UCC
HBN8451UC
HBN8651UC
HBL8642UC
HBL8651UC
HBL8661UC
Table 10 Option codes for 800 series wall ovens
1. Follow the steps in the Accessing Service Mode section.
2. Advance through the menu until Option Code: #### is visible
(#### = current option code).
3. Press (1) to edit; option code will blink when editable.
4. Use the numeric keypad to enter the new option code.
5. Press Enter when the correct option code is displayed.
6. Press Oven Clear/Off on single ovens or Upper Clear/Off on
double ovens to exit Service Mode.
Always confirm that the oven and all components are functioning
normally after setting the option code.
7.2.3
1. Follow the steps in the Accessing Service Mode section.
2. Advance through the menu until Error Memory is visible
3. Press (1) to show the error list; if no errors are logged, nonE
will be visible in the display.
Errors are displayed in numeric order; the error code (Exxx)
will appear on the left and the error count will appear on the
1901 Main St ▪ Suite 600 ▪ Irvine, CA 92614
Service Manual for Bosch 800 Series Built-in Wall Ovens
Option Code
3055
3045
3145
3155

Displaying Error Memory

Page 37 of 43
800 944-2904