PRYME SPM-2200 TrooperII Manual

How to use the SPM-2200 TrooperII

Microphone

The PRYME SPM-2200 TROOPER II

microphone uses a special NOISE-CANCELING

microphone which is designed to help lter out ambient background noise. When you press

the PTT (Push-to-Talk) button on the SPM-2200, the FRONT MIC INPUT of the microphone

picks up the sound of your voice, which is transmitted over the air. The AMBIENT NOISE

PICKUP on the rear of the unit picks up nearby sounds, which are ltered out of the

transmitted signal.

REAR

FRONT

For best audio clarity, when using

this microphone you should hold

the microphone directly in front

of your mouth, at a very close

distance of approximately 1 inch

(3 cm), and speak directly into the

front-facing microphone input.

Table of Contents

Need help?

Do you have a question about the SPM-2200 TrooperII and is the answer not in the manual?

Page 1 How to use the SPM-2200 TrooperII Microphone ® The PRYME SPM-2200 TROOPER II ® microphone uses a special NOISE-CANCELING microphone which is designed to help lter out ambient background noise. When you press the PTT (Push-to-Talk) button on the SPM-2200, the FRONT MIC INPUT of the microphone picks up the sound of your voice, which is transmitted over the air.
Page 2 For users who prefer to side-talk their microphone and do not require the noise-canceling feature, we recommend the original PRYME SPM-2100 Trooper series speaker microphone. DO NOT hold the microphone more than 2 inches (5 cm) away from your face.