Advertisement
Menu Operation
Touch menu operation
Call up method
Take middle point position on the bottom of display screen as starting point, use touch pen to drag
towards screen center position to call up touch menu, as shown below.
Note: "Touch A Method" mentioned in this manual to call up touch menu method is shown above.
Setting menu
Input setting
Press INPUT button on remote control or via touch A method to call up Input Setting menu;
Press
button on remote control to select the channel you need;
Press the Enter button on remote control or directly click with touch pen to confirm selected input channel;
Press return key on remote control, or click blank area outside menu with touch pen to exit menu.
Note:
"
"symbol represents that this channel has been connected to a signal
Note: PC channel will only display when you connect the built-in computer.
A
Input
Light
Volume
AV
More
11
Advertisement
