Before You Begin; Cel-Fi Go M Installation; Install Donor Antenna; Install Server Antenna - CEL-FI GO M Quick Start Manual

Cel-Fi GO M Installation

Before You Begin

Cel-Fi GO has a Donor Antenna Port and a Server Antenna Port.
They are marked on the device with icons (see illustration). It is
critical that the Donor and Server antennas are connected to the
correct port.
SERVER
I

Install Donor Antenna

Place the Donor Antenna on the vehicle. Make sure you consider the
entire system and required cable lengths.
• Install antenna at least 12 inches from any other antennas for best
performance
• Antenna should be free of obstructions
• Antenna should be away from windows (including sunroof or other
openings)
• Install 8 inches away from any people
• For best performance make sure there is 50cm of metal around the
base of the antenna.
2

Install Server Antenna

Install Server Antenna in the cab where coverage is needed.
• For best results, install Donor and Server Antennas such that there is
substantial material between the antennas. This will create isolation and
allow the system to perform at higher gain without oscillation or feedback.
• Keep Donor and Server Antennas separated/isolated from each other
for best performance.
• The power supply may not be NEMA 4 rated.
Cel-Fi GO M: Smart Signal Booster
Donor Antenna
TIPS AND TECHNIQUES
Donor Antenna
TIPS AND TECHNIQUES
DONOR
Server Antenna
4