CEL-FI Go Quick Start Manual

CEL-FI GO QUICK START GUIDE
CEL-FI GO is an evolved cellular signal booster design that can
amplify cellular signals up to 70 dB. Connect a single Donor
Antenna to receive the macro-network signals, and then a single
indoor Service Antenna where you need service, and CEL-FI GO
will do the rest automatically.
I
qsg_GO-mobile-ENG_15-1209

Install Donor Antenna

Mount your Donor Antenna on the exterior of the vehicle, towards
the rear, according to its design, and the type of vehicle it's being
used with. Make sure you consider the cable connection to the
CEL-FI GO unit with your location choice.
For best performance make sure there is 50cm of metal plane
around the base of the antenna.
2

Install Service Antenna

Install Service Antenna in the cab, towards the front, where
coverage is needed. Ideally, there should be substantial
material, like the metal of the roof, between the Donor and
Service antennas, to improve isolation.
SMART SIGNAL BOOSTER
DONOR ANTENNA (Not Included)
SERVICE ANTENNA
(Not Included)
MOBILE VERSION
www.Cel-Fi.com