Cel-Fi GO M Quick Start Guide Smart Signal Booster ™ Cel-Fi GO M is optimized for mobile applications such as trucks, boats, and RVs. It features the IntelliBoost technology which allows it to ™ automatically adjust to the fast changing cellular network conditions as you move.
Page 2
Cel-Fi WAVE. Connect to Cel-Fi GO M with a bluetooth enabled mobile device, and manage the boost settings. NEMA 4 Rating The Cel-Fi GO M is NEMA 4 rated, and can be used both indoors and outdoors. The NEMA 4 rating provides the following advantages: •...
EN 301 489-50 v2.2.0 EN 301 908-1 v11.1.1 EN 301 908 v11.1.2 EN 301 908 v11.1.2 EN 300 328 v2.1.1 EN 62311 (2008) Regulation (EC) 1275/2008 (Standby and Off mode) Regulation (EC) 278/2009 (External Power Supply) Cel-Fi GO M: Smart Signal Booster...
Cel-Fi GO M Installation Before You Begin Cel-Fi GO has a Donor Antenna Port and a Server Antenna Port. They are marked on the device with icons (see illustration). It is critical that the Donor and Server antennas are connected to the correct port.
Page 5
Best to make sure all cable lengths support the intended plug in at this time. mounting location BEFORE permanent mounting. Connect Donor & Server Antennas to the Cel-Fi GO M Unit Donor Antenna Server Antenna Cel-Fi GO Plug in Cel-Fi GO M...
User Interface Cel-Fi GO M features an LED on the top face to indicate the unit’ s state: MEANING Solid GREEN The unit is working properly and boosting properly. Blinking GREEN Unit is scanning for networks to boost. Blinking RED The unit is in an error condition.
Need help?
Do you have a question about the GO M and is the answer not in the manual?
Questions and answers