Care And Maintenance; Update Software - Polaris RideCommand User Manual

MAINTENANCE

CARE AND MAINTENANCE

Use a soft cloth to clean the housing. Mild soap and water may be used. Do not
use harsh or abrasive cleaners.
The touch screen can be disabled in order to clean the display. For best results,
use a micro-fiber towel to clean the screen. Window cleaner or alcohol may be
used.
Immediately clean off any gasoline that splashes on the display.
STORAGE
When preparing the vehicle for storage make sure the ignition switch is in the
OFF position to prevent battery drain and a shortened battery life.
SPEED LIMITATION
Various aspects of the display such as the front facing camera, GoPro preview,
phone contacts and call logs may be unavailable while driving at various
speeds.

UPDATE SOFTWARE

Before updating the Display, always export your existing rides and waypoints
To update the software, do the following:
ON YOUR PERSONAL COMPUTER
1. Upload the most recent software from ridecommand.polaris.com to a USB
flash drive.
ON YOUR VEHICLE
1. Press the Apps Screen button.
2. Tap on settings app and select General settings.
3. Select the Update Software arrow.
4. Select the down arrow icon to the left of the update you would like install.
5. Press Yes to install.
6. The display will initiate the update and restart with the new software. Do not
remove the USB flash drive until the display has fully restarted.
NOTE
NOTE
to a USB drive to avoid losing them.
MAINTENANCE
43