Table of Contents
Advertisement
DYNAMIX™ ACTIVE SUSPENSION
ADVANCED DIAGNOSTICS
The system continuously monitors the
health and state of all input and output
signals. If a fault is detected, the
system reverts to a safe operating
state and alerts the operator of a
component or system problem via the
SCM diagnostic indicator on the
RideCommand™ display.
Suspension activity notifications can
be turned enabled/disabled from the
vehicle the setting menu.
PROCESSING CAPABILITY
DYNAMIX™ Active Suspension controls current to the shock valve 1000 times
per second, performs vehicle dynamics calculations 200 times per second, and
can actuate a shock from soft to firm approximately 20 times per second.
DYNAMIX™ MODE SWITCH
Your RZR is equipped with a suspension control mode switch that allows you to
change the suspension control mode of your DYNAMIX™ Active Suspension
system on-the-fly. There are 3 available drive modes to select from: Comfort,
Sport, and Firm.
The rider should use caution to select the appropriate ride mode to match the
current terrain conditions and driving style. Failure to select an appropriate ride
mode could lead to vehicle dynamic behaviors not matched to the terrain or
The system will prevent mode transitions from a more firm operating mode to a
more soft operating mode when a current active vehicle state is present
38
driver's skill level.
(cornering, braking, accelerating, or airborne).
WARNING
NOTICE
Hide quick links:
Advertisement
Table of Contents
