Hardwire Mobile Phone; Connecting The Bluetooth Headset With The Display - Polaris RideCommand User Manual

8. When a Smartphone is connected to the display via Bluetooth, users are
able to make phone calls from the display through the keypad, recent calls,
or their contacts by pressing the phone icon in the device manager screen or
through the pull down menu.
There is no built in microphone in the display. Phone call audio will play
through the phone speakers or Polaris approved headset if connected. Some
dial options may be unavailable at speeds greater than 3 MPH.

HARDWIRE MOBILE PHONE

Users can also hardwire their smart phones to connect to the display and play
music. To do this just plug a USB charge cable for your smartphone into the USB
pigtail/ port (see page 31).
USB music playback is not available on all devices.
CONNECTING YOUR BLUETOOTH HEADSET WITH THE DISPLAY
The Display can connect with Polaris approved Bluetooth headsets to listen to
music, take phone calls, and talk with other riders. Use the following steps to
connect your Bluetooth headset to the Display.
To connect your Bluetooth Heaset to your display, do the following:
FEATURES AND CONTROLS
NOTE
NOTE
23