Scag Power Equipment STC48V-26BS, STC52V-23BV, STC61V-23BV Operator's Manual page 2

FAILURE TO FOLLOW SAFE OPERATING PRACTICES
* Keep all shields in place, especially the grass discharge chute.
* Before performing any maintenance or service, stop the machine and
remove the spark plug wire and ignition key.
* If a mechanism becomes clogged, stop the engine before cleaning.
* Keep hands, feet and clothing away from power-driven parts.
* Read this manual completely as well as other manuals that came
with your mower.
* Keep others off the tractor (only one person at a time)
* DO NOT operate on steep slopes. To check a slope, attempt to back
up it (with the cutter deck down). If the machine can back up the slope
without the wheels slipping, reduce speed and use extreme caution.
Under no circumstances should the machine be operated on slopes
greater than 15 degrees. ALWAYS FOLLOW OSHA APPROVED
OPERATION.
* DO NOT mow on wet grass. Wet grass reduces traction and steering
control.
REMEMBER - YOUR MOWER IS ONLY AS SAFE AS THE OPERATOR!
Hazard control and accident prevention are dependent upon the awareness,
concern, prudence, and proper training of the personnel involved in the
operation, transport, maintenance, and storage of the equipment.
STC48V-26BS with a serial number of D1300001 to D1399999
STC52V-23BV with a serial number of D1400001 to D1499999
STC61V-23BV with a serial number of D1200001 to D1299999
SMTC-48V
SMWC-52V
SMWC-61V
Always use the entire serial number listed on the serial number
tag when referring to this product.
WARNING:
MAY RESULT IN SERIOUS INJURY.
This manual covers the operating instructions
and illustrated parts list for:
with a serial number of C7000001 to C7099999
with a serial number of C7100001 to C7199999
with a serial number of C7200001 to C7299999