Tires; Body, Deck, And Upholstery - Scag Power Equipment FREEDOM Z SFZ36-17KA Operator's Manual

Scag power equipment lawn mower user manual
Table of Contents

Advertisement

R
CUTTER BLADE
LOCKWASHER
5/8-11 x 1-1/2" HEX HEAD BOLT
TORQUE TO 75 FT/LBS
Figure 7-9.
Blade Replacement
- Note -
Be sure that the blade is installed with the lift wing
toward the top.
5.
Install the cutter blade onto the cutter spindle shaft.
Secure the blades from rotating and torque to 75 ft/
lbs. See Figure 7-9.
7.9

TIRES

Check the tire pressures after every 8 hours of operation
or daily.
Caster Wheels
Drive Wheels
7.10

BODY, DECK, AND UPHOLSTERY

CAUTION
Do not wash any portion of the equipment while it
is hot. Do not wash the engine; use compressed
air.
1.
After each use, wash the mower and cutter deck.
Use cold water and automotive cleaners. Do not use
pressure cleaners.
FLATWASHER
25 PSI
8 PSI
34
2.
Do not spray electrical components.
3.
Use a mild soap solution or a vinyl/rubber cleaner to
clean the seat.
4.
Repair damaged metal surfaces using Scag touch-
up paint available from your authorized Scag dealer.
Wax the mower for maximum paint protection.
Section 7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents