Programming Your Pager Number; Fax Storage - Savin SPC210SF User Manual

Chapter 8
Programming your
pager number
When Paging is selected, your machine dials
the pager number you've programmed, and
then dials your Personal Identification
Number (PIN). This activates your pager so
you will know that you have a fax message in
the memory.
Press Menu/Set, 2, 5, 1.
Remote Fax Opt
1.Fwd/Page/Store
Press ▲ or ▼ to select Paging .
Press Menu/Set.
Enter your pager phone number
followed by # # (up to 20 digits).
Press Menu/Set.
Do not include the area code if it is the
same as that of your machine.
For example, press:
1 8 0 0 5 5 5 1 2 3 4 # #.
If your pager needs a PIN, enter the PIN,
press #, press Redial/Pause, enter your
fax number followed by # #.
Press Menu/Set.
For example, press:
1 2 3 4 5 # Redial/Pause 1 8 0 0 5 5 5 6
7 8 9 # #
—OR—
If you do not need a PIN, press
Redial/Pause, enter your fax number
followed by # #.
Press Menu/Set.
For example, press:
Redial/Pause 1 8 0 0 5 5 5 6 7 8 9 # #
8 - 2
Press Stop/Exit.
Note
■
You cannot change a Paging number or
PIN remotely.
■
If you have set Paging, a backup copy of
the received fax will automatically be
printed at the machine.

Fax Storage

If you select Fax Storage, your machine
stores the received fax in the memory. You
will be able to retrieve fax messages from
another location using the Remote Retrieval
commands.
Press Menu/Set, 2, 5, 1.
Remote Fax Opt
1.Fwd/Page/Store
Press ▲ or ▼ to select Fax Storage .
Press Menu/Set.
Press Stop/Exit.
Note
If you have set Fax Storage, a backup copy
will automatically be printed at the machine.