Chapter C
Clean the exit roller. This will help to
prevent paper jams at the paper exit and
dirt from appearing on your printouts.
Close the back cover.
Plug the machine's power cord back into
the AC power outlet first, and then plug
in the telephone line cord. Turn on the
machine's power switch.
Cleaning the laser glass
Turn off the machine's power switch.
Unplug the telephone line cord first, and
then unplug the power cord from the AC
power outlet.
Open the scanner unit.
C - 24
Open the inside cover so that it latches
under the scanner unit.
To release the lock, push the green belt
cartridge lock levers that are on both
sides inwards.
Remove the OPC belt cartridge from the
machine.