Code Blink Out - One for All URC-6210 Instruction Manual

706115_URC_6210-11_S_10t:Zapper_3

Code Blink Out

After you have used the Search Method, you can find out which code
the ZAPPER responded to by blinking back the code. It's handy to know
your Television code for future reference. Remember, you can only
blink back your code after the ZAPPER is operating your device.
To blink out your TV code:
1 Press and hold the MAGIC key until the red LED blinks twice (the LED
underneath the POWER key will blink once then twice).
2 Next, press MUTE, CHANNEL -, CHANNEL +.
3 For the first digit of your 5-digit code, press VOLUME + and count the
red blinks.
4 For the second digit, press VOLUME - and count the red blinks.
5 For the third digit, press CHANNEL + and count the red blinks.
6 For the fourth digit, press CHANNEL - and count the red blinks.
7 For the fifth digit, press MUTE and count the red blinks.
Write the code for your TV in the boxes provided on page 5 for easy future
reference.
WWW.ONEFORALL.COM
All manuals and user guides at all-guides.com
12-12-2007 11:5
7