Table of Contents
Advertisement
Job Separation—Separating Printing Sets
On The Paper Delivery Tray
The print on the top of each print set on the paper delivery tray is pulled by the
job separator. This function is useful when you make 2 or more print sets.
R CAUTION:
• While printing, do not touch the belt at the end of the paper deliv-
ery tray or the job separator. You might be injured.
Limitation
In Job Separation mode, the following limitations apply:
Metric version
Minimum paper size
Length: 210 mm
Width: 128 mm
Inch version
Minimum paper size
Length: 8.3"
Width: 5.1"
Note
When you use thin paper, it is not recommended to use Job Separation mode.
The job separator might tear the paper.
If the job separator touches the print image, the completed prints might be
dirty. In this case, it is not recommended to use Job Separation mode.
When you do not use Job Separation mode, you can select the machine con-
dition after each printing set is fed out to the paper delivery tray with the user
tools. See "Manual Class" in
Job Separation—Separating Printing Sets On The Paper Delivery Tray
GRJOBS0E
Maximum paper weight
2
127.9 g/m
Maximum paper weight
34 lb
P.139 "4. Mode Setting".
Paper delivery tray capacity
2
600 sheets (64 g/m
)
Paper delivery tray capacity
600 sheets (17 lb)
1
77
Advertisement
Table of Contents
