Adjusting Print Image Density; Before Making A Master; After Making A Master - Savin 3350DNP Operating Instructions Manual

OPERATION

Adjusting Print Image Density

You can adjust the print image densi-
ty to suit your needs. There are two
1
ways to do this:

Before Making A Master

Use the {Image Density} key.

After Making A Master

Use the {Speed} keys.
Before Making A Master
A
Press the { { { { Image Density} } } } key to ad-
just the image density.
Skip Feed
B
Press the { { { { Start} } } } key.
Program
Clear/Stop
26
Image Density
Stamp
Lighter On Line
Normal
Darker 1
Make-Up
Darker 2
Overlay
Tint
Edge Erase Economy Mode
Job Separator
TPES340N
Clear Modes
Auto Cycle
Proof
Print
Enter
Start
TPES050N
After Making A Master
A
To increase the image density,
press the { { { { W W W W } } } } key. To reduce the
image density, press the { { { { V V V V } } } } key.
Speed
Combine Class Slow
1
Note
The faster the printing speed be-
comes, the lighter the printing
density is. If you want darker
prints, decrease the printing
speed.
Fast
TPES100N