Specifications; Tank Capacities - Binks 183S-500 Service Manual

EN
5/10/15-GALLON STAINLESS STEEL TANK ASSEMBLIES – SPECIFICATIONS & OPTIONS
Maximum Working Pressure
Tank Shell
Tank Lid
Fluid Tube
Fluid Outlet (Elbow)
Fluid Valve, Outlet
Agitator Paddle/Propeller
Agitator Shaft
Agitator Shaft Seal
Air Manifold
Plug (Air Manifold Coupling)
Bottom Outlet (Optional Kit)
TYPE
No Regulation (Air inlet pressure gauge
only)
Standard Single Regulation
Standard Double Regulation
Extra Sensitive Regulation
Extra Sensitive Regulation with
Standard Gun Regulation
TYPE
No Agitation
Gear-reduced Drive Agitation
www.carlisleft.com

SPECIFICATIONS

STAINLESS STEEL TANKS
110 psi
304 Stainless Steel
304 Stainless Steel
3/8 in. SS Pipe, 316 Stainless Steel
S316 Stainless Steel
316 Stainless Steel 3/8-18 NPS(M)
Nylon, Glass Filled
303 Stainless Steel
Engineered PTFE, Stainless Steel
Steel, Zinc Plate
18-8 Stainless Steel
304 Stainless Steel 3/4-14 NPS(M)

TANK CAPACITIES

Nominal
Actual Capacity
Capacity
5 US Gallons 9.8 US Gallons
10 US Gallons 11.8 US Gallons
15 US Gallons 19.8 US Gallons
AIR CONTROL OPTIONS
APPLICATION
Holding tanks, Transfer tanks, Used where precision fluid pressure control is not
required.
Provides standard fluid pressure control only. For use where precision control of
both fluid and air pressures is not required. Also Used where atomization air can
be taken from filter/regulator air lines.
Precision control for use with materials that are best applied at low, closely
controlled, fluid and atomization air pressures. Used with portable air compressors
or with air lines when no other means of air pressure regulation is available.
Provides extremely accurate, low pressure, fluid pressure control
Provides extremely accurate, low pressure, fluid pressure control plus precision
control of spray gun atomizing air.
AGITATION OPTIONS
APPLICATION
Materials that require minimal or no mixing and/or readily hold any solids in
suspension.
Heavy-duty agitator for medium to high viscosity materials that require mixing
and/or solids suspension.
4 / 12 77-3134-R1.0 (9/2017)