Binks 183S-500 Service Manual page 11

VS-534
FLUID STRAINER
Primary fluid strainer that attaches between
fluid outlet valve and fluid hose to strain
material. Components made of stainless
steel with a nylon filter. Comes standard
with 100-mesh screen. For more information
see SBBI-7-072.
HFRL-508, HFRL-509
CLEAN AIR™ CONTROL UNITS
These units are designed to remove
dirt, pipe scale and most liquid aerosol.
Includes an automatic drain which expels
liquids which accumulate in the filter bowl.
29-3100 SCRUBS
®
HAND CLEANER TOWELS
Scrubs are a pre-moistened hand cleaner
®
towel for painters. No water is needed.
83-2924 FLUID Y-STRAINER
Attaches on fluid outlet of tank. Includes
100-mesh filter screen. (Additional filter
screens in other mesh sizes available.)
77-3134-R1.0 (9/2017)
ACCESSORIES
DISPOSABLE TANK LINERS
Molded polyethylene tank liners reduce solvent waste
and tank cleanup time. The liner is made of tough,
durable, leakproof poly-ethylene and can be used
with all compatible materials.
PTL-408-K20 Kit of 20 tank liners (9.8 gal.)
PTL-412-K8 Kit of 8 tank liners (11.8 gal.)
PTL-415-K10 Kit of 10 liners (19.8 gal.)
PROSPECTOR ™
FOR 5, 10, AND 15 GALLON TANKS
Prospector™ strainers are an economical way to remove foreign material
from paint, stain, lacquer and coatings.
Inner Diameter .............. 11.75" (298.45mm)
Outer Diameter ............ 15.375" (390.52mm)
Height/Depth .................... 3.75" (95.25mm)
Case Qty..................................................20
PTS-5Gal-K20-200 ................... 200 micron
PTS-5Gal-K20-400 ................... 400 micron
PTS-5Gal-K20-600 ................... 600 micron
11 / 12
PRESSURE TANK STRAINERS
(approx. 65 wire mesh)
(approx. 37 wire mesh)
(approx. 28 wire mesh)
www.carlisleft.com
EN