Huawei SUN2000-33KTL-A User Manual page 72

SUN2000-(33KTL-A, 36KTL, 42KTL)
User Manual
Figure 5-32 Connecting wires to an RJ45 connector
(1) White-and-orange
(5) White-and-blue
Step 2 Crimp the RJ45 connector using a crimping tool.
Step 3 Remove the locking cap from the COM1 waterproof cable connector at the SUN2000 bottom
and remove the plug from the locking cap.
Step 4 Route the cables through the locking caps and then the COM1 port at the SUN2000 bottom.
Step 5 Insert the RJ45 connector into the RJ45 network port in the SUN2000 maintenance
compartment.
Figure 5-33 Connecting communications cables
Step 6 Bind communications cables after connecting them.
Issue 07 (2018-05-04)
(2) Orange
(6) Green
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(3) White-and-green
(7) White-and-brown
5 Connecting Cables
(4) Blue
(8) Brown
66