Huawei SUN2000-33KTL-A User Manual page 21

SUN2000-(33KTL-A, 36KTL, 42KTL)
User Manual
Figure 2-12 SUN2000 working modes
Table 2-5
Table 2-5 Working mode description
Working
Mode
Standby
Operating
Shutdown
Issue 07 (2018-05-04)
describes the three working modes shown in
Description
The SUN2000 enters the standby mode when the external environment does
not meet the requirements for starting the SUN2000. In standby mode:
 The SUN2000 continuously performs self-check and enters the operating
mode once the operating requirements are met.
 If the SUN2000 enters the shutdown mode after detecting a shutdown
command or a fault after startup.
In operating mode:
 The SUN2000 converts DC power from PV strings into AC power and
feeds the power to the power grid.
 The SUN2000 tracks the maximum power point to maximize the PV
string output.
 The SUN2000 enters the shutdown mode after detecting a fault or a
shutdown command, and enters the standby mode after detecting that the
PV string output power does not meet the requirements for grid-tied
electricity generation.

In standby or operating mode, the SUN2000 enters the shutdown mode
after detecting a fault or shutdown command.
 In shutdown mode, the SUN2000 enters the standby mode after detecting
a startup command or that a fault is rectified.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 2-12.
2 Overview
15