Briggs & Stratton 040351 Operator's Manual page 18

Control panel prompts
Automatic Mode
In Automatic Mode, the display screen will display via
scrolling text:
• GENERATOR READY - if the unit is in standby and
utility power is present.
• GENERATOR ON - if the unit is running and utility
power is not present.
• SERVICE CODE - if a system service code has been
detected.
General System parameters
To view general system parameters, press the MENU button.
The following will scroll across the digital display and then
move to the next item:
• Run time
• Date
• Time
• Exercise Cycle date and start time
The user can press the LEFT ARROW or RIGHT ARROW at
any time to move to the next item.
The user can press ESCAPE to go back to GENERATOR
READY.
If no user inputs are made for 10 seconds after all the items
have been displayed, the control board will reset to
GENERATOR READY.
18
AUTOMATIC MODE
GENERATOR READy OR SERVICE CODE DESCRIpTION
(When Generator NOT Running - Auto Mode)
GENERATOR ON
(When Generator Running - Auto Mode)
(MENU)
RUN TIME
or
DATE
or
TIME
or
EXERCISE CyCLE