1. Manuals
  2. Brands
  3. Digisol Manuals
  4. Security Camera
  5. DG-SC7369-18
  6. User manual

Digisol DG-SC7369-18 User Manual

2mp 18x speed dome ip camera
Hide thumbs Also See for DG-SC7369-18:
Table of Contents

Advertisement

Quick Links

Download this manual
DG-SC7369-18
2MP 18x SPEED DOME IP CAMERA
User Manual
V1.0
2017-11-16
As our products undergo continuous development the specifications are subject to change without prior notice

Advertisement

Table of Contents
loading

Related Manuals for Digisol DG-SC7369-18

Summary of Contents for Digisol DG-SC7369-18

  • Page 1 DG-SC7369-18 2MP 18x SPEED DOME IP CAMERA User Manual V1.0 2017-11-16 As our products undergo continuous development the specifications are subject to change without prior notice...
  • Page 2 Please check with your local distributors for latest information. No part of this document can be copied or reproduced in any form without written consent from the company. Trademark DIGISOL is a trademark of Digisol Systems Ltd. All other trademarks are the property of the respective manufacturers.

  • Page 3: Table Of Contents

    DG-SC7369-18 User Manual INDEX 1. Product Introduction...............................5 1-1 Introduction and safety information....................... 5 1-2 Safety Information............................6 1-3 System Requirements............................6 1-4 Package Contents............................6 2 Using Network IP Camera by Web Interface......................7 2-1 Locate the IP address of Network IP Camera....................7 2-2 Connect to IP camera’s Web User Interface....................
  • Page 4 DG-SC7369-18 User Manual 4-3-8-3 System..............................35 4-3-8-3 a) Device Manager..........................35 4-3-8-3 b) Local Config..........................39 4-3-8-3 c) Remote Config..........................41 4-3-8-3 d) Account............................41 4-3-8-3 e) Local Log............................43 4-3-9 Playback.............................43 4-3-10 Advance............................44 4-3-11 Logout..............................44 5 Appendix..................................45 5-1 Specifications..............................45 5-2 Troubleshooting............................

  • Page 5: Product Introduction

    Thank you for purchasing DIGISOL IP cameras!! DIGISOL Speed Dome PTZ IP Camera HD Resolution with IR LED and IR-cut Filter. This camera offers the latest compression technology with a CMOS sensor & a real time image processing hardware. With its high performance H.264 compression, users can stream high quality video at low bandwidth and storage...

  • Page 6: Safety Information

    Before you start using this IP camera, please check if there’s anything missing in the package, and contact your dealer of purchase to claim for missing items:  DG-SC7369-18 Speed Dome Camera  Quick Installation Guide  Installation Guide CD (includes user manual, QIG & CMS software) ...

  • Page 7: Using Network Ip Camera By Web Interface

    DG-SC7369-18 User Manual 2 Using Network IP Camera by Web Interface 2-1 Locate the IP address of Network IP Camera You must know the IP address of IP Camera before you can connect to it. By default the IP camera is on Static IP & default IP address is 192.168.1.160. Connect the camera to router or a switch &...
  • Page 8 DG-SC7369-18 User Manual Click OK to display the camera video. There are various controls on the web page; here is the description of every control item: Icon Illustration To control horizontal/ vertical movement of the camera & open/close automatic scan...
  • Page 9 DG-SC7369-18 User Manual Full screen Preview Tab: To close/open video, by default it is opened. To modify Mainstream/ Substream, by default default is Mainstream. For camera with audio function, by default is mute. 3D function switch, by default is disabled.
  • Page 10 DG-SC7369-18 User Manual Preset setup a) Setting Presets To configure preset, turn the PTZ cam to desired position and click to setup, click to call, click to delete b) Setting Cruise You can configure 8 cruise on this IPC & each cruise supports 16 presets each.
  • Page 11 DG-SC7369-18 User Manual Click to call this cruise, click to stop the cruise Click to delete the preset in the cruise, click to edit the preset in the cruise, after modifying click to save. c) Scan settings Support AB Scan, Auto Scan & Pattern Scan (Track) as shown below:-...
  • Page 12 DG-SC7369-18 User Manual Point the camera to desired location & click to set up the left point for scan Point the camera to desired location & click to set up the right point for scan Then click to start the scan between Left & Right position; click it again to stop...

  • Page 13: Speed Dome Ipc Menu

    DG-SC7369-18 User Manual Speed Dome IPC Menu: Call preset 95 to enter the Menu of speed dome IPC as shown below:- 1. Mirror: To switch ON/ OFF mirror image of IPC. By default it’s OFF 2. Flip: To switch ON/ OFF the flip mode of IPC. By default it’s OFF 3.

  • Page 14: Log

    DG-SC7369-18 User Manual 2-3 Log Under this tab, you can view the logs of IPC as shown below: 2-4 Config You can configure advanced parameters of IPC under this tab. 2-4a Base Config Following are the sub menus under this ‘Base Config’ option.
  • Page 15 DG-SC7369-18 User Manual Time: You can configure Time Settings i.e) Setting time Manually OR to sync the IPC time with NTP server under this tab. Maintain:You can Reboot, Restore the IPC settings by reserving the IP Address / User details,...

  • Page 16: 2-4A-2 Network

    DG-SC7369-18 User Manual 2-4a-2 Network Under Network, there are different menus like Eth & Service available as displayed below:- ETH: You can modify the IP address details of camera under this tab. Services: You can modify IPC ports like RTSP, HTTP, RTMP under this tab.

  • Page 17: 2-4A-3 Av

    DG-SC7369-18 User Manual 2-4a-3 AV You can configure Video parameters of IP camera under this tab. If you click on Advance, it will display the below screen: Here you can set the parameters like bit rate, stream type, quality, etc.

  • Page 18: 2-4A-4 Image

    DG-SC7369-18 User Manual 2-4a-4 Image You can configure Image Settings under this Option. There are different sub menus available under this tab as described below:- Display: You can configure color settings like brightness, contrast, saturation, etc under this option. OSD: The overlay Text, Bit Rate, Time information can be configured under this tab to be...
  • Page 19 DG-SC7369-18 User Manual Video mask: You can define 4 privacy mask zones under this tab. ICR: You can set the IR LED settings under this tab.

  • Page 20: 2-4A-5 Safe

    DG-SC7369-18 User Manual 2-4a-5 Safe You can modify the administrator password of IPC under this tab. 2-4b Advance Config Under this tab, you can configure advanced parameters on this IP camera. 2-4b-1 Network The following options are available in ‘Network’ tab under ‘Advance Config’:...

  • Page 21: 2-4B-2 Event

    DG-SC7369-18 User Manual 2-4b-2 Event You can configure Motion Detection Settings under this tab. Motion detect: You can set the area for Motion detection & also define a desired Schedule or enable it for 24x7. Hide detect: You can set a mask on IPC for specific schedule & integrate it with Email, FTP.

  • Page 22: 2-4B-4 Ptz

    DG-SC7369-18 User Manual 2-4b-4 PTZ You can set the PTZ settings under this tab. There are three sub menus under this tab. PTZ: PTZ parameters are displayed in screen below. Task: You can set the schedule for respective PTZ action like AB scan, Cruise, Auto Scan, Preset or...

  • Page 23: 2-4B-5 Status

    DG-SC7369-18 User Manual Park Action: You can set the respective Idle Action from drop down menu for defined Park time e.g) Cruise2 is selected as Idle Action for Park time 15sec that means if the IPC is idle for 15sec, it will automatically start Cruise2.

  • Page 24: Ptz Commands To Control Via Nvr

    DG-SC7369-18 User Manual 3 PTZ commands to control via NVR This PTZ IP Dome camera supports 8 Cruise with 16 Presets in each cruise. You can use Web GUI of IP Camera to control cruise setting & to load the menu of this IP camera.

  • Page 25: Using Cms Software

    DG-SC7369-18 User Manual 4. Using CMS software 4-1 Installing CMS Software The CMS software provides various functions like video recording. After this software is installed, you can use your IP camera to safeguard your property. Please follow the below mentioned instructions to install the CMS software.
  • Page 26 DG-SC7369-18 User Manual 3. The screen as shown below will appear. Click ‘Next’ to continue. 4. Click Next & browse the location.
  • Page 27 DG-SC7369-18 User Manual 5. Proceed by clicking Next to finish the installation. 6. Please wait while installation is being performed. This may take few minutes, please be patient. 7. A new icon will appear on your computer’s desktop, you can double click on it to start CMS.

  • Page 28: Getting Familiar With Cms Software

    DG-SC7369-18 User Manual 4-2 Getting familiar with CMS Software To start CMS, double click CMS icon on your computer’s desktop: Or click ‘Start’ button of Windows, and select ‘All Programs’ -> ‘CMS ->Launch CMS’ CMS login screen will appear as shown below:...
  • Page 29 DG-SC7369-18 User Manual Default user ID is ‘admin’ and default password is none (leave it blank), click ‘OK’. The main window of CMS will appear: The CMS Main Menu options are described as below:- Main Menu Sub Menu Function Preview You can view the IP camera live video, touring &...
  • Page 30 DG-SC7369-18 User Manual displayed. Remote Config You can manage the Web GUI parameters of respective camera using this tab. Account You can create user privileges for CMS software control under this tab. Local Log All type of Logs including System & Operational will be displayed under this tab.

  • Page 31: Cms Configuration

    DG-SC7369-18 User Manual 4-3 CMS Configuration 4-3-1 CMS Operation Main Menu 4-3-2 Device display area In this area, you can preview live video by device and super account administrator setting, click device name or channel group to change channels. 4-3-3 Operation area You can preview live video, setup parameters of system configuration and video search in this area.

  • Page 32: Video Disk Status Area

    DG-SC7369-18 User Manual 4-3-5 Video disk status area It displays disk space of defined path where the videos are stored locally. 4-3-6 PTZ Displays PT Controls & Settings 4-3-7 Operation log It displays operation information in this window. 4-3-8 Menu Area To configure advanced settings in CMS software.
  • Page 33 DG-SC7369-18 User Manual Right Click Menu If you right click on Video display, it will prompt the window as shown below:- Close window: close the current video Close all window: close all the current videos Audio: If you click this option, audio will be enabled for selected live video screen Local record: Click this option to record the selected channel at path defined under Local Config>>Base Config option...

  • Page 34: Ptz Control

    DG-SC7369-18 User Manual 4-3-8-1 PTZ control You can Pan/ Tilt, Zoom, Focus, set preset and tour for supported IP cameras using this PTZ Controls in CMS software. Item Description Pan / Tilt control Click the direction arrow to control camera’s pan / tilt.

  • Page 35: Color Setting

    DG-SC7369-18 User Manual Click to start/ stop the desired Tour & click on to edit the defined tour. 4-3-8-2 Color Setting You can adjust the brightness, Contrast, Saturation & Hue settings under this option to get the desired Image quality. Click default to reset the configured image settings.
  • Page 36 DG-SC7369-18 User Manual Click button to add the Zone as shown below: Once you define the Zone, it will be listed under Zone List. Click icon & click on IP Search button to discover the IP Cameras connected in Local LAN.
  • Page 37 DG-SC7369-18 User Manual Select the desired IP camera from the list & enter the details as shown below:- Device Name: Give any Name. Domain: If you are having any DDNS account of remote IP camera, you can specify under this field.
  • Page 38 DG-SC7369-18 User Manual Double click on it to connect the IP camera in CMS software. Click icon to edit the settings of Added Camera in CMS software. Click icon to delete the added camera in CMS software. Note: Please make sure the device is disconnected before modifying or deleting it.

  • Page 39: B) Local Config

    DG-SC7369-18 User Manual Click icon to test the connectivity of added camera. 4-3-8-3 b) Local Config If you click Local config button, it will display the following window: Under Base Config, you can configure the settings as shown above. You can set the Recording Mode for respective cameras along with the Storage path & overwrite...
  • Page 40 DG-SC7369-18 User Manual You can check the CMS software information under Version tab:...

  • Page 41: C) Remote Config

    DG-SC7369-18 User Manual 4-3-8-3 c) Remote Config Using this tab you can manage the Web GUI of an IP camera from CMS software. 4-3-8-3 d) Account In this menu, you can configure IP camera’s login account. There are two kinds of accounts: Administrator: Can view IP camera’s video and make changes of camera setting...
  • Page 42 DG-SC7369-18 User Manual Add/ delete group and set group privileges as shown above. User Account You can Add/ Delete user account & modify user password under this menu.

  • Page 43: E) Local Log

    DG-SC7369-18 User Manual 4-3-8-3 e) Local Log All type of Logs including System & Operational will be displayed under this tab. You can search/ export the logs based on Date/ time search. 4-3-9 Playback There are 2 playback modes---Remote playback and Local playback.

  • Page 44: Advance

    DG-SC7369-18 User Manual 4-3-10 Advance There are various sub menus like Decoder, Map, Tour & Task Config under this tab. 4-3-11 Logout To log off the CMS software.

  • Page 45: Appendix

    DG-SC7369-18 User Manual 5 Appendix 5-1 Specifications Feature DG-SC7369-18 Sensor 1/2.8" CMOS Sensor Lens Vari-Focal Focal Length 5mm～90mm Min Illumination 0.01Lux with AGC ON Max Resolution 1920 x 1080 (1080P) @ 25fps IR LED 8 PCS IR array LED, Up to 120m distance...

  • Page 46: Troubleshooting

    DG-SC7369-18 User Manual 5-2 Troubleshooting Please don’t panic when you find this IP camera is not working properly. Before you send this IP camera back to us, you can do some simple checks to save your time: Problem description Possible solution(s) Cannot connect to IP Camera ...

  • Page 47: Glossary

    DG-SC7369-18 User Manual 5-3 Glossary H.264: H.264 is the latest compression technology that significantly reduces the file size of high-quality video images. Offers higher video resolution than Motion JPEG or MPEG-4 at the same bit rate and bandwidth, or the same quality video at a lower bit rate.
  • Page 48 DG-SC7369-18 User Manual IP filtering: The IP camera can either white list or blacklist an IP address. This restricts unauthorized access to the IP camera. Infrared (IR) cut-off filters: They are used with color CCD or CMOS imagers to produce accurate color images.

Table of Contents