Kenmore 106.5176 Use & Care Manual page 26

Water from the dispenser
is not cool enough
(on some models)
ICE AND WATER Possible Causes andi/or Recommended Solutions
NOTE: Water from the dispenser is chilled to 50°F (10°C).
• New installation - Allow 24 hours after installation for the water supply to cool completely.
• Recently dispensed a large amount of water - Allow 24 hours for the new water supply to cool completely.
• Water has not been recently dispensed - The first glass of water may not be cool. Discard the first glass of water
dispensed.
• Refrigerator is not connected to a cold water pipe - Make sure the refrigerator is connected to a cold water pipe. See
"Water Supply Requirements."
ACCESSORIES
Replacement Parts:
To order stainless steel cleaner or replacement filters, call
1-800-4-MY-HOME ®and ask for the appropriate part number listed below
or contact your authorized Kenmore dealer.
Stainless Steel Cleaner and Polish:
Order Part #D22 M40083 R
Water Filter:
Order Part #9930 (P4RFKB2 or P4RFKB12)
Air Filte_
Order Part #W10335147A
26