Optical Characteristics - Philips BRILLIANCE 190P5EB Installation And Operation Owner's Manual

Hide thumbs Also See for BRILLIANCE 190P5EB:
Table of Contents

Advertisement

Product Information
• Sync input signal
• Sync polarities
• Video interface
TM
• Light Frame
Audio
• Loudspeaker
• Headphone connector
• Input signal connector
• Stand-alone audio output

Optical characteristics

• Contrast ratio
• Brightness
• Peak contrast angle
• White Chromaticity
• Viewing Angle (C/R>10)
• Response time
sRGB
sRGB is a standard for ensuring correct exchange of colors between different devices (e.g.
digital cameras, monitors, printers, scanners, etc.)
Using a standard unified color space, sRGB will help represent pictures taken by an sRGB
compatible device correctly on your sRGB enabled Philips monitors. In that way, the colors
are calibrated and you can rely on the correctness of the colors shown on your screen.
Important with the use of sRGB is that the brightness and contrast of your monitor is fixed to
a predefined setting as well as the color gamut. Therefore it is important to select the sRGB
setting in the monitor's OSD.
To do so, open the OSD by pressing the OK button on the front of your monitor. Use the
down button to go to Adjust Color and press OK again. Then move the down button to go to
sRGB and press OK again.
Exit this OSD.
After this, please do not change the brightness or contrast setting of your monitor. If you
change either of these, the monitor will exit the sRGB mode and go to a color temperature
setting of 6500K.
For more information on sRGB, please visit:
Page 3 of 9
Separate sync
Composite sync
Sync on green
Positive and negative
Dual input: D-Sub (analog) and DVI-D (digital) are
available and user selectable
Brightness and sharpness enhancement
4W Stereo Audio (2W/channel RMSx2, 300 Hz-12
kHz, 16 ohm, THD=10%, PMPO 32 Watts)
3.5mm mini jack
3.5mm mini jack
Audio output can still function whenever there is an
audio source playing, even there is no video input.
Note: The volume adjustment can not function under
the following conditions:
1. A warning message appears on screen
2. No audio input
700:1 (typ.)
2
300 cd/m
(typ.)
6 o'clock
x: 0.283 y: 0.297 (at 9300°K)
x: 0.313 y: 0.329 (at 6500°K)
x: 0.313 y: 0.329 (at sRGB)
Upper >85° (typ.)
Lower >85° (typ.)
Left >85° (typ.)
Right >85° (typ.)
<25 ms (typ.)
www.srgb.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Brilliance 190p5esBrilliance 190p5eg

Table of Contents