Optical Characteristics - Philips BRILLIANCE 230W5 Product Information

Product Information
• Video dot rate
• Input impedance
- Video
- Sync
• Input signal levels
• Sync input signal
• Sync polarities
• S-Video
• CVBS
• Input Frequency
• Video interface
AUDIO
• Input level for PC/Video
• Loudspeaker

Optical characteristics

• Contrast ratio:
• Brightness:
• White Chromaticity:
• Viewing Angle (C/R>10)
• Response time
* This data is subject to change without notice.
Resolution and Preset Modes
• Maximum 1920 x 1200
• Recommended 1920 x 1200 at 60Hz
20 factory preset modes:
file://W:\DFU\Philips\LCD\230W5.W231\ENGLISH\230W5\product\product.htm
< 165 MHz (Digital input)
75 ohm + 3%
2.2K ohm
0.7 Vpp
Separate sync
Composite sync
Sync on green
Positive and negative
Y input 1.0Vpp, C input 0.3Vpp, 75ohm input impedance
Composite, 1.0Vpp, 75 ohm input impedance
WUXGA Hsync 75 kHz, Vsync 60 Hz (N.I.)
WXGA Hsync 48 kHz, Vsync 60 Hz (N.I.)
SVGA Hsync 38 kHz, Vsync 60 Hz (N.I.)
VGA Hsync 31 kHz, Vsync 60 Hz (N.I.)
DVI-I, D-Sub, S-Video, composite and components video
(YPbPr)
500mV nominal
6W Stereo Audio (3W/channel RMSx2, 200 Hz-10 kHz)
500:1 (typ.)
2
250 cd/m (typ.)
x: 0.283 y: 0.297 (at 9300°K)
x: 0.313 y: 0.329 (at 6500°K)
Upper >88° (typ.)
Lower >88° (typ.)
Left >88° (typ.)
Right >88° (typ.)
16 ms (typ.)
RETURN TO TOP OF THE PAGE
Page 2 of 6
2004/3/26