Plantronics EXPLORER 220 User Manual page 8

1
2
220
|

3
UK
PAIRING
If headset has previously been paired
with another device, please follow these
instructions for pairing a second time.
Ensure that the headset is fully charged.
For instructions on set-up and pairing
with other Bluetooth devices, please
consult your Bluetooth device user guide
or visit www.plantronics.com/easytopair,
an online, interactive pairing guide for
phones and headsets.
Begin with headset turned off.
1.
Press and hold down the call
control button for 8 seconds until
the headset status indicator begins
to flash blue then red.
The headset is now in pairing mode
for the next 120 seconds.
2. While the headset is flashing, use the
phone menu to search for Bluetooth
devices and select "220Plantronics. "
3.
When prompted for a password,
enter 0000. Headset will flash blue
when paired successfully.
NOte:
The headset can pair to multiple
Bluetooth devices, but will only connect
to one device at a time. The headset will
automatically connect to the last device to
which it was connected.