Installation Procedure - Oracle Audio Origine MkII Owner's Manual

Installation procedure

Note : A pair of white gloves is part of the accessories kit provided with your Origine turntable. We strongly
suggest that you use them. Remove your gloves for manipulating the oil syringe and filling the spindle holder to
prevent the contamination of the gloves. We suggest to wear the gloves when manipulating the platter as well!
- Install the three adjustable feet by screwing them under each of the three legs of the Origine.
- Add the full content of the syringe (5ml) of bearing oil into spindle holder.
-
Gently install the platter by slowly and vertically lowering the spindle in the spindle holder.
-
Remove the orange protective cap on top of the tonearm pivot shaft.
Note: Use this protective cap every time you remove the tonearm from the pivot shaft. Be
careful from now on as the tip of the pivot is extremely sharp and could cause injury!
Origine
Owner's Manual
MkII
Oracle Audio Technologies
6